Radio frequency microneedling machine supplied directly from the factory is equipped with 2 handles,one handle for face and neck areas,the other for body. This article talks about the vertical model,if you want a smaller microneedle radiofrequency to easily carry around,you can also get portable one from our company. Ice hammer is a option for you to calm the skin after the treatment.
How it works
Radio Frequency Microneedling Machine is a minimally invasive fractional therapy that combines microneedling and radio frequency energy. Radio frequency energy is injected into the deep layer of the skin through tiny needles. The thermal stimulation generated by radio frequency stimulates the skin's self-repair mechanism, liquefies and destroys fat cells, stimulates the production of skin fibrous tissue and collagen, thereby reducing fat, tightening the skin, and removing acne scars and stretch marks.
Application occasions
1. Face/neck areas: Use Radio Frequency Microneedling Machine to remove fine lines, eliminate acne scars, treat acne, shrink pores, tighten skin, and face lift
2. Body areas: remove superficial scars,remove stretch marks,body slimming,tightening of loose and sagging skin,weight loss
Advantages of choosing us
The Radio Frequency Microneedling Machine uses a unique burst mode radio frequency technology to automatically deploy radio frequency energy to multiple layers deep in the skin within one cycle, acting on three layers of tissue in sequence at millisecond intervals, treating three layers of skin at one time, thereby minimizing the damage caused by microneedle radio frequency to the skin. It is a breakthrough solution for anti-aging and repairing the surface of the skin.
Advantages and features
1. Provides the deepest micro needle rf treatment, which can penetrate the subcutaneous tissue up to 8mm.
2. Achieve humanized operation: the depth can be adjusted between 0.5 and 7mm, the needle depth can be freely adjusted, and can be used on skin of any thickness.
3. Gradient insulated probe, needle body 0.22mm, needle tip 0.1mm, minimizes damage to the epidermis, avoids burning the skin, avoids pigmentation, almost no pain and no bleeding.
Machine Configuration
Two high quality handles,one face handle,one body handle
4 kinds of treatment heads,12-pin for small corners(eye corner,mouth corner),24-pin for face and neck,40-pin for body,micro-crystal head for skin solution introduction.
Optional handle--ice hammer,to calm and repair the skin,promote skin solution absorption
Technical characteristics
Technology | radio frequency microneedling machine |
Screen | 10.4 inch |
Output Frequency | 4MHz |
Depth | 0.5-7mm+1mm |
Handle | 2 pcs,one for face,one for body |
Treatment probes | 4 types:12-P,24-P,40-P,Nanocrystal head |
Voltage | AC110V~230V±10%,50Hz-60Hz |
Gross weight | 28.4kg |
Package size | 49×46×102cm cm |
RFQ about this machine
(1) How long does the recovery period take?
After microneedle radiofrequency treatment,the shortest recovery time is generally about 4 days, while the longest recovery time may take 14 days, or even more than 20 days. The recovery time depends on the physical condition of each person.
(2) When can I see results?
Radio Frequency Microneedling Machine treatments can show visible improvements within a few days, and the full results will be apparent within 2-3 months as collagen and elastin production processes continue to improve.